How to Program Chevy Key Fob

Thinking about upgrading your Birmingham driving experience with a new Chevy car, truck, or SUV? When you first bring your new vehicle home, you may need to know how to program the Chevy key fob. When you follow along with the simple, step-by-step Chevy key fob programming instructions from Hendrick Chevrolet Hoover below, you’ll be taking advantage of this convenient feature in no time! If you have any questions along the way, our service team is happy to help – just give us a call at (205) 383-1619!

Chevy Key Fob Programming: Follow Along Step-by-Step

First thing’s first: You’ll need to have your Chevy remote start key fob in hand to get started. Then, take the following steps.

1. Manually unlock your car door with your Chevy key.
2. Ensure all car doors are fully shut, then insert the key into the ignition, but don’t turn the key yet.
3. On the driver’s side door, press and hold the unlock button, then turn your key to the “On” position in the ignition. Your interior lights and touchscreen display will come on, but the engine should not ignite.
4. Quickly turn your key back to the “Off” position, then turn it to “On” and right back to “Off” once more in succession. (On – Off – On – Off)
5. Release the unlock button on the driver’s door.
6. Upon releasing the unlock button, the door locks should cycle through engaging and disengaging. This is when you’ll know that the programming sequence has begun.
7. On your Chevy key fob, press and hold the “Unlock” and “Lock” buttons at the same time until you hear the door locks cycle again, signalling that you’ve successfully programmed the Chevy key fob.
8. Insert the newly programmed key back into the ignition in the “On” position to stop the programming sequence.

Whether you’re programming a Chevy Malibu key fob or a Chevy Silverado key fob is no matter – the instructions outlined here will work for all models.

Where Should I Go for a Chevy Key Fob Replacement?

It happens to the best and most organized Vestavia Hills drivers! If ever you’re in need of a Chevy key fob replacement, the most reliable place to visit is a certified Chevrolet dealership like Hendrick Chevrolet Hoover. When you rely on a dealership instead of a general auto parts store, you can be absolutely sure you’re buying a genuine Chevy key fob that is designed to work with your vehicle.

In need of a new Chevy key fob battery? Hendrick Chevrolet Hoover can assist with this as well! Get in touch with our parts center today to learn more. Our Chevy parts specialists will make sure you leave with everything you need. And if you need help replacing the battery in your key fob, we’ll be happy to take care of it for you!

Get Additional Chevy Key Fob Assistance at Hendrick Chevrolet Hoover

Need a little help learning how to use the Chevy remote start key fob? You can count on Hendrick Chevrolet Hoover near Bessemer to help! Contact us or visit our dealership in Hoover today to learn more. Our team is always happy to provide information on Chevy technologies, from Chevy MyLink info to HomeLink® help and so much more.